Maintenance of gas, diesel or biomass boiler heating
Gas, diesel and biomass boiler maintenance plans
| Basic Business | Business 365 | |
|---|---|---|
|
From 160 € /year |
According to quote |
|
|
yearly payment |
yearly or monthly payment |
|
| Boiler or water heater check | According to quote | Segons pressupost |
| Maintenance certificate | ||
| 24-hour emergency hotline | ||
| Breakdowns included (call-out and labour costs) | According to quote | According to quote |
| Urgent repair within 24 hours | ||
| Six-month warranty on the repairs | ||
| Support during audits and inspections by Government Partner Institutions |
The prices do not include VAT
Breakdowns
included
The BUSINESS 365 maintenance plan covers as many breakdowns as your business needs
Cumulative
breakdowns
Add up the total breakdowns in your custom BUSINESS plan and use them according to your company's needs
24-hour
assistance
Your business is covered 365 days a year. Call +34 972 658 419 whenever you need to
Regulatory and legal compliance
We inspect your systems according to legal requirements and support you in audits and inspections by Government Partner Institutions.
Because prevention is always better than repairs.
Arrange the maintenance services your company needs
FAQS about the maintenance of gas, diesel or biomass boiler heating
What does the gas system check include?
According to Royal Decree 1027/2007, gas systems with a rated power of < 70 kW must be checked once a year and gas systems with a rated power of ≥ 70 kW must be checked twice a year. This includes the following:
- Inspecting the flue system, ducts and chimneys
- Cleaning the boiler burner
- Inspecting the expansion vessel
- Inspecting refractory material
- Checking the tightness of the seal between the burner and boiler
- General gas boiler inspection
- Checking water pressure in circuits
- Checking pipe circuit tightness
- Checking tightness of interception valves
- Calibrating safety elements
- Inspecting and cleaning water filters
- Inspecting pumps and fans
- Inspecting the domestic hot water preparation system
- Inspecting thermal insulation condition
- Inspecting automatic control systems
- Environmental quality inspection according to UNE 171330 standards (CO2)
- Inspecting devices exclusively for DHW production
What does the diesel system check include?
According to Royal Decree 1027/2007, diesel systems with a rated power of < 70 kW must be checked once a year and those with a rated power of ≥ 70 kW twice a year. This includes the following:
- Inspecting the flue system of boilers
- Inspecting flue ducts and chimneys
- Cleaning the boiler burner
- Inspecting the expansion vessel
- Inspecting water treatment systems
- Inspecting refractory material
- Checking the tightness of the seal between the burner and boiler
- Checking water pressure in systems
- Checking pipe circuit tightness
- Checking the tightness of interception valves
- Checking safety element defects
- Inspecting and cleaning water filters
- Inspecting heat exchange batteries
- Inspecting pumps and fans
- Inspecting the domestic hot water preparation system
- Inspecting thermal insulation condition
- Inspecting automatic control systems
- Environmental quality inspection according to UNE 171330 standards
What does the biomass system check include?
According to Royal Decree 1027/2007, biomass systems must be checked twice a year. This includes the following:
- Inspecting the flue system of boilers
- Inspecting flue ducts and chimneys
- Cleaning the boiler burner
- Inspecting the expansion vessel
- Inspecting water treatment systems
- Inspecting refractory material
- Checking the tightness of the seal between the burner and boiler
- Checking water pressure in systems
- Checking pipe circuit tightness
- Checking tightness of interception valves
- Checking safety element defects
- Inspecting and cleaning water filters
- Inspecting heat exchange batteries
- Inspecting pumps and fans
- Inspecting the domestic hot water preparation system
- Inspecting thermal insulation condition
- Inspecting automatic control systems
- Checking the storage condition of solid biofuel
What's the difference between the BASIC BUSINESS and BUSINESS 365 plans?
The BUSINESS 365 plan includes an urgent repair service (within 24 hours) 365 days a year, while the BASIC BUSINESS plan guarantees your repair in the next few working days.
What type of systems does the maintenance plan cover?
We have maintenance plans for the following systems: gas boiler, diesel boiler, biomass boiler, air conditioning, aerothermics, geothermics, photovoltaic system, solar thermal system, electricity and pipework.
Each system has its own maintenance plan. If you arrange an air conditioning maintenance plan, the maintenance plan will cover the air conditioning system you have included.
Can I create a tailored plan for my business?
Yes. All the business maintenance plans are tailored. And you can arrange for the maintenance of one or more systems.
What's the difference between preventive and corrective maintenance?
Preventive maintenance is carried out regularly to ensure that the systems are in the best possible condition to work properly. Corrective maintenance repairs or replaces parts that have caused a problem.
How often do the maintenance visits take place?
Preventive maintenance visits depend on the system and the applicable legislation. Please consult the specific FAQs for your company’s systems.
Do you perform maintenance of systems installed by other companies?
ClimaProtec performs maintenance of systems installed by other companies and systems it has installed itself.
Do you provide custom quotes?
Yes, and with no obligation. We adapt to the type of system, its age, use and regulatory requirements:
- Our estimates for maintenance plans are free of charge.
- Our estimates for upgrades and new installations cost €45.
Does the service cover breakdown repairs?
Each BUSINESS maintenance plan includes a number of breakdowns arranged according to a prior quote tailored to your business, which includes call-out and labour costs. The material needed is invoiced separately.
Breakdowns are cumulative when you sign up for more than one BUSINESS maintenance plan. Let’s say you arrange a BUSINESS 365 maintenance plan for Air Conditioning and the BUSINESS Gas Boiler plan. That will include the total number of repairs included in the two plans. You can use these as needed. If a total of four repairs were included, you could have three air conditioning repairs and one boiler repair, for example, but breakdowns in other systems would not be covered.
Do you have a 24-hour emergency service?
Yes. ClimaProtec has a 24-hour hotline and emergency service. As a client, call +34 972 658 419 whenever you need to.
If I have a BASIC BUSINESS plan which includes one breakdown, can the problem be resolved urgently when I need it?
With the BASIC BUSINESS plan we’ll come and sort out your breakdown as soon as we can. This is included in the plan. If you want to benefit from the urgent repair service (within 24 hours), you’ll pay the difference between the breakdown included in your BASIC maintenance plan and the 24-hour emergency service.
If I sign up for the BASIC BUSINESS plan, can I ask for an urgent repair?
SÃ. Como cliente ClimaProtec puedes solicitar el servicio de reparación urgente y resolveremos tu averÃa en menos de 24 horas. El importe del servicio de reparación urgente y el coste de la reparación se facturará aparte de tu plan de mantenimiento.
What is the usual response time for a breakdown?
When we receive your call, we’ll contact you within 24 hours to resolve the issue as soon as possible. If you have an urgent breakdown, we’ll come and deal with it within 24 hours.
Does it include call-out or is there an additional cost?
Each BUSINESS maintenance plan covers the breakdowns that you have previously covered, which include call-out and labour costs. The basic call-out rate will apply to any additional breakdowns.
What are the yearly prices or monthly fees?
The yearly prices and monthly fees vary according to the budget tailored to your business.
Is there a minimum contract period?
The minimum contract period is one year.
Do maintenance services have a minimum term or cancellation fee?
All the maintenance services are covered by annual contracts, for which we offer two payment methods:
- Single yearly payment: the entire service fee is paid during the maintenance visit. If you decide to cancel before the one-year contract ends, ClimaProtec will continue to provide you with the service until the contract ends, and no reimbursement will be made. This payment method can be used for the BASIC BUSINESS and BUSINESS 365 maintenance plans.
- Monthly payment in instalments: an initial payment is made when arranging the service, and the following month’s payment takes place by bank transfer between the 1st and 10th of each month. If you wish to cancel the contract, the monthly fee will continue to be charged, and you will be entitled to the maintenance service you have arranged for the remaining months until the end of the year. This payment method can be used for the BUSINESS 365 maintenance package.
So there is an annual commitment to the contract, and it is renewed every year, but there is never a penalty for withdrawing from the contract.
Does the service renew automatically?
Yes, the service renews automatically via direct debit.
I want to cancel the service. What do I do?
A minimum notice period of 30 days before the contract’s expiration date is required. If notice is not provided at least 30 days in advance, the contract will be automatically renewed, and the annual fee will be charged accordingly.
How do I pay for the maintenance service?
Payment for BASIC BUSINESS is yearly, by bank transfer, with a minimum contract term of one year.
Payment for BUSINESS 365 is yearly or monthly, by bank transfer, with a minimum contract term of one year.
What happens if the payment by bank transfer is returned or rejected?
If a direct debit payment is returned or rejected, our administration department will carry out the necessary contractual checks and issue a new invoice, including any associated return costs.
If payment cannot be processed, the service will be automatically cancelled.
How do I know if my systems need maintenance?
After the maintenance plan contract comes into force, your agent will contact you to make the first maintenance visit for the systems covered.
Can I add more appliances to the plan later?
Yes, you can add appliances at any time. We’ll create a new expanded budget and the contract will be for at least one year from the expansion.
Do you provide reports or certificates for each check?
Yes, ClimaProtec will send you the check report and tell you about the state of your systems.
Can we schedule checks outside business hours?
Visits for checks are arranged with each client according to their needs, taking business hours into account.
How is the first visit arranged?
When your system’s maintenance plan contract comes into force, an agent will contact you to carry out your first maintenance visit.
Are the staff your own employees, or subcontracted?
ClimaProtec’s team is made up of its own employees.
Do you provide basic training for the company's staff on how to use the appliances correctly?
Yes. The technician will tell you what you need to know so that your appliances to perform properly in both new installations and in maintenance plans.
We provide use and consultation manuals for new installations.
However, please contact us to resolve any queries if you have them.
Do I have to have a maintenance contract for my business?
According to the legislation, you must keep up to date with the maintenance checks for each of your systems. At ClimaProtec we recommend arranging a maintenance plan for all of your company’s systems, and we will make sure that you keep up to date with the checks as stipulated in each regulation.
Do I have to keep maintenance records?
Yes. We will prepare a maintenance report at ClimaProtec, and send it to you. If you have an inspection, you can show the report as a record.
Remember that when issues are identified during a maintenance visit, they must be repaired to make sure that the system is in perfect operating condition.
Do you keep official maintenance logs or records?
Yes, we keep the official maintenance logs or records required by the regulations. You must keep a copy of the records and have them to hand for an inspection.
During an inspection, how can I prove that my maintenance is up to date?
ClimaProtec will send you the maintenance report so you can present it during the inspection.
If there's an accident or fire, can I be fined if I haven't had the maintenance done?
Do systems have to undergo regular official inspections?
Yes. Depending on the type of system and use (residential, commercial, public, etc.), the legislation stipulates regular inspections by an authorised oversight body.
- Thermal systems (boilers, HVAC, aerothermal systems, etc…) are regulated by Royal Decree 1027/2007.
- Low voltage electrical systems are regulated by Royal Decree 842/2002.
How often do these inspections have to take place?
That depends on the type of system and the premises involved. Examples include:
- Public places (bars, shops, restaurants, etc.-): an electrical inspection every 5 years.
- Garages > 25 spaces: an electrical inspection every 5 years.
- Thermic systems ≥ 70 kW: a check every 4 years.
Who has to pay for inspections?
Does ClimaProtec deal with the authorised oversight body?
Yes, in fact we recommend that the ClimaProtec maintenance technician responsible for maintenance visits to your business is present during the inspection by the authorised oversight body.
Does ClimaProtec provide the certificates required?
Does ClimaProtec maintenance meet the requirements of Royal Decree 1027/2007 (Heating System Regulations for Buildings)?
Do you do legionella inspections?
Are you registered as an installation/maintenance company?
Do you have the mandatory professional licences?
Do you have civil liability insurance?
ClimaProtec installation, repair and maintenance warranty
Installations carried out by the ClimaProtec team are covered by a one-year warranty, and repairs are covered by a six-month warranty.
Preventive maintenance carried out by the ClimaProtec team is covered by a 15-day warranty.
If the ClimaProtec team detects a breakdown during maintenance, we will inform you so that you can authorise the repair.
If a breakdown occurs after the maintenance visit, the ClimaProtec team will review the visit report and assess whether the issue originated before the maintenance visit.
To ensure quality and warranty coverage for installations, maintenance and repairs, ClimaProtec only installs equipment and replacement parts supplied directly by our authorised providers.
Tailor-made proposals for each business
Fill out the form and we'll call you to arrange a visit. We'll give you a quote based on your company's requirements and your systems.
24-hour emergency service
for SMEs, businesses and the self-employed
Available 365 days a year
